Can the MX250 failover to a MX100?

Solved
GFrazier
Building a reputation

Can the MX250 failover to a MX100?

Got a situation:

Client site originally had a MX100. They setup a secondary location with a MX250. They are consolidating back to the original location and want to use both firewalls for redundancy. I want to use the MX250 as the primary. Can the MX250 failover to a MX100?

1 Accepted Solution
GFrazier
Building a reputation

 
 
 
 
 
 
 
 
 
Conversationalist
 
 
 
 
 
 
 

 

That would not be possible:

 

The secondary MX must be the same MX model as the primary. Warm spare functionality is not supported between different MX models (e.g. MX80 & MX100).

 

Here's the full document: https://documentation.meraki.com/MX/Deployment_Guides/MX_Warm_Spare_-_High_Availability_Pair

View solution in original post

1 Reply 1
GFrazier
Building a reputation

 
 
 
 
 
 
 
 
 
Conversationalist
 
 
 
 
 
 
 

 

That would not be possible:

 

The secondary MX must be the same MX model as the primary. Warm spare functionality is not supported between different MX models (e.g. MX80 & MX100).

 

Here's the full document: https://documentation.meraki.com/MX/Deployment_Guides/MX_Warm_Spare_-_High_Availability_Pair

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels