Can an MX65 remote without internet through MPLS into HQ site that has Internet/MPLS

SteveM
Here to help

Can an MX65 remote without internet through MPLS into HQ site that has Internet/MPLS

I have client that has 6 location network - HQ (MX84) and 3 remotes (MX65w's) have MPLS and have Internet. 

 

2 Remotes Only have MPLS (MX65's) - 

 

Can I have an mpls connection into remotes and still have the meraki management/internet traffic traverse the mpls network into HQ and then offload from HQ MPLS port into Internet Port? Static Routes being added would do it correct?   

1 static route on remote pointing to HQ

2 or 3 static routes on HQ pointing to remotes - 

 

Didn't know if anyone has done an internet offload type of solution on the MX platform 

1 REPLY 1
PhilipDAth
Kind of a big deal
Kind of a big deal

In short, yes.

 

There are two ways.  You can use AutoVPN over MPLS (my preferred solution - because it is bullet proof):

https://documentation.meraki.com/MX-Z/Site-to-site_VPN/Configuring_Site-to-site_VPN_over_MPLS

 

You can also do it with tracked routes.

https://documentation.meraki.com/MX-Z/Deployment_Guides/MPLS_Failover_to_Meraki_Auto_VPN

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels