Block intervlan routing MX64

[EdgeFarming]

Hello,

I have following LAN networks.

LAN1 Vlan15   192.168.128.0/24

LAN2 Vlan10 10.10.10.0/24

I want to block LAN1 to access LAN1. I created rules under outbound rules but they are not working. Please check Attached screenshots.

Please let me know what I am missing.

[ww]

Fw rules do not work on active sessions. You need to wait like 10 minutes for the firewall to clear active session.

Or reboot the mx to clear all sessions

[jimmyt234]

As well as this you need to test using actual end user devices, and not ping the MX itself as it will often ignore firewall rules. (Unclear if .3 is a host of the MX itself)

[EdgeFarming]

Yes, 10.10.10.4 is my PC and 192.168.128.3 is an Access Point. I will wait for 10 min to take effect. Thanks

[EdgeFarming]

Hi, ok ok I will wait 10 min or reboot the router, I'll let you know.

is that time apply for every rule? I mean if I block 10.10.10.4 to access nike.com  Do I need to wait 10 min to take effect? Because I also tried that and didn't work. 

Thanks

[ww]

Im not sure about the session timeout, could be 5-10 minutes. Also would depend on if the protocol closes the session itself or not.

If you didnt go to that website before, it should work/be blocked.