Meraki

Community

AnyConnect - User cannot connect after authentication.

Solved
nc_liam
Conversationalist
‎Sep 23 2022 5:55 AM
‎Sep 23 2022 5:55 AM

AnyConnect - User cannot connect after authentication.

Can anyone shed any light on why this user cannot connect and gets this error message displayed.

nc_liam_0-1663937502103.png

 

The the event log just show this

 Session disconnected. Session Type: SSL, Duration: 0d:00h:03m:07s, Bytes xmt: 0, Bytes rcv: 0, Reason: User Requested



0 Kudos
1 Accepted Solution
nc_liam
Conversationalist
‎Sep 26 2022 1:12 AM
‎Sep 26 2022 1:12 AM

Turns out someone had installed a version of AnyConnect from 2012!

Installing the latest version resolved the issue.

View solution in original post

0 Kudos
2 Replies 2
KarstenI
Kind of a big deal
Kind of a big deal
‎Sep 23 2022 2:22 PM
‎Sep 23 2022 2:22 PM

What is AnyConnect listing in its Message History?

If you found this post helpful, please give it Kudos. If my answer solves your problem, please click Accept as Solution so others can benefit from it.
0 Kudos
nc_liam
Conversationalist
‎Sep 26 2022 1:12 AM
‎Sep 26 2022 1:12 AM

Turns out someone had installed a version of AnyConnect from 2012!

Installing the latest version resolved the issue.

0 Kudos
Back to the top
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco ID. If you don't yet have a Cisco ID, you can sign up.
Labels
© 2025 Cisco Systems, Inc.