We have several MX firewalls setup with 2 4G WAN routers.
If like in the screenshot below, WAN 1 looses internet and the port goes into a failed state, the MX fails over to WAN 2 as it should, but fails to route traffic to 10.1.1.2 out WAN 1, it sends it out WAN 2. I feel the WAN 1 and WAN 2 subnets should be present in the routing table and still apply even if a WAN port goes into a failed state.
Does anyone have a workaround for the bellow situation, as we are using SD WAN we can still remote control PC's on site, and can get to the web interface of WAN 2's 10.1.2.1. but packet captures on WAN 1 and WAN 2 show attempts to connect to 10.1.1.2 are going out WAN port 2, which doesn't make sense.
![JimTolson_0-1630503704287.png JimTolson_0-1630503704287.png](https://community.meraki.com/t5/image/serverpage/image-id/19974i5EFAA8109E922062/image-size/medium?v=v2&px=400)