strange behaviour with Ports

[Xydocq]

Lately I noticed something strange on the Meraki Go app. Devices even online showed offline and the information on the ports seem to be messed up.

On this screen both devices connected to the GX20 show fine but when I dive into the information of each device it looks different.

Is it Port 4 or Port 3? from what I recall port 4 isn't in use on my GX20.

And this device is offline on Port 3, which I am sure was used for the other device, but uses Port 2 to be online?.

Any one else experience such a behaviour lately?

Firmware is 18.1.06

[Hoamboy]

Jup, same here.

See https://community.meraki.com/t5/Questions-and-Answers/SONOS-settings-Help-Please/m-p/192527#M1625

[hidden0 · Accepted solution]

Hello @Xydocq,

This is certainly misleading. Thank you for letting us know there is odd behavior with reported port numbering. We'll take a look and be sure this gets fixed as soon as possible.

[Xydocq]

The web-app and the phone-app are now showing the right port-numbers on the settings page. 

[Hoamboy]

Agree - ports showing correctly for me as well now 👍