As of today with iOS app version 2.91.0
Well done Dev Team!
Good to know but....
not available on android app 2.90.0 or on the web app ☹️
Ehhh - in my web app I have it available:
Maybe you check again?
Go to Hardware - take your GX - and click Settings upper right corner
Found it, thanks
But they just added that, now I see there are 2 NEW features available
Still missing on Android ☕☕
Is there anything useful that can be done with this ?
for example…can you setup a rule to allow all wan outbound internet traffic to go out a specified physical port other than your default internet port?
depends on what you call useful?
You can block all outgoing internet traffic for a vlan, you can block vlan to vlan traffic or limit a vlan to access only certain parts of another vlan.
In my opinion, it is useful to have a level 3 firewall on a device.
Came across this
————————————
For those looking for a list of ports to block, the SANS Institute recommends at least blocking outbound traffic using the following ports:
Are L3 firewall rules available on the GX20 or only the GX50? I have a GX20, I see the L3 Firewall Rules setting, but after I create a new rule it disappears. It does not show up in the list (empty) when I go back in, and is not being executed by the router. Using the iOS app.
hi @abbraaa
You should be able to set firewall-rules on a GX20.
Try to set the rules on web.meraki-go.com, if the rules are still not working open a support ticket.
After setting up the firewall-rules, you'll need to restart the GX20. More info can be found here: VLAN communicaton setup - The Meraki Community
Cheers