GX50 Site-to-site VPN

JimC_NY
Conversationalist

GX50 Site-to-site VPN

I'm looking to set up site-to-site VPN with GX50.  I currently have one site with one and will be adding a separate location soon for a few workers out of state.  They'll mostly be using the larger volume printers in the 1st location.  My question is: when setting up the 2nd location, does it need to have the same IP range, or do I not want that?  

 

For example, location 1 has PCs and printers  on 192.1.10.1

Should location 2 use the same IP range, or should it be on a separate one such as 192.168.20.1?

4 Replies 4
LowCloud
Here to help

Hey Jim

I might be wrong but isnt the GX50 Client VPN only not site to site

Regards

Daren

JimC_NY
Conversationalist

It was recently updated to support site-to-site if using a GX50 in both locations. 

https://documentation.meraki.com/Go/Features/Meraki_Go_-_Site_to_Site_VPN

LowCloud
Here to help

Hey Jim

I stand corrected.

Daren

LowCloud
Here to help

Different range though

HQ 192.168.0.0

Site1 192.168.1.0

Get notified when there are additional replies to this discussion.