Documentation Digest: September 9th - September 12th

[Hannah-C]

New articles:

Downloading Secure Client for Cisco Software Central

Change: New article.

Secure Connect:

Cisco Secure Connect - Cloud Firewall Policy

Change: Added section "Recommended Use of Objects in the Rules".

Remote Access - Secure Client configuration

Change: Added "Secure Client on Linux hosts does not support "VPN establishment for RDP". VPN establishment rules for Linux hosts only apply to SSH sessions. Please refer to this link for more details."

MX:

MX Sizing Guide & Principles

Change: Added vMX-XL specifications; added note "Dual power supply models have an active/standby redundant power supply and do not provide combined power."

MX67 and MX68 Datasheet

Change: Added note that the number of users mentioned in "Recommended use case" refers to the number of the Client devices that are connected to the network, which can checked by navigating to Network-Wide > monitor > Clients.

MX650 Datasheet

Change: Updated "Recommended Device Count" for MX650 (25,000).

Dynamic DNS (DDNS)

Change: Added notes how the different DDNS URLs will resolve to the active WAN uplink, WAN 1 and WAN 2.

MS:

Restricting Traffic with Isolated Switch Ports

Change: Added port isolation behavior for MS-based and CS-based switches.

MR:

AI-RRM

Change: Added "If FRA is disabled, the 2.4 GHz radios that were turned off by FRA will automatically be re-enabled within 1 hour."

CW9163E Datasheet

Change: Added "2x2 MIMO with two spatial streams".

SM:

Windows Enrollment

Change: Added section "Auto-installing the Windows Agent"; added note that Azure AD, Google and OpenID Connect are no longer supported for Windows Agent Enrollment.

Enabling Device Owner Mode using Android Debug Bridge (ADB)

Change: Added "Please note that Meraki Systems Manager now only supports Android 10 and above, see the "Supported Operating Systems" KB for more info."

Systems Manager Agent and MDM Profile Enrollment

Change: Added note "Please use agent versions greater than 3.7.2."

MT:

MT Frequently Asked Questions

Change: Added note "Free licensing for MT is not available in Subscription model."

General Administration:

FIPS 140 for Meraki

Change: Added MS17.1+ / CS17.1+ for FIPS 140-3 Compliance.

[PhilipDAth]

>Downloading Secure Client for Cisco Software Central

I don't think this is accurate.  You need a support contract (like SmartNet) on AnyConnect licences to get access.  A support contract can be added to as many CCO logins as you like.

I don't think the Smart Licencing centre is involved in giving download privileges in any way.

I could be wrong ...

[Brash]

It's definitely true that you can't download Secure Client from software central without a valid contract. At the very least, that should be in a note at the top of the document.

[Brash]

A bit of semantics:

Change: Added vMX-XL specifications; added note "Dual power supply models have an active/standby redundant power supply and do not provide combined power."

This note was added (correctly) to the "MX-Series" section of Portfolio Capabilities in the document. The section is just listed incorrectly here - vMX's are virtual and thus don't have power supplies.