New articles:
MG52 and MG52E eSIM Activation Guide using Control Center
Change: New article.
Change: New article.
Change: New article.
Change: New articles.
Change: New articles.
Change: New article.
MG:
Change: Added antenna profile images.
MX:
Change: Added "Not all NAT features are supported such as Port Forwards, 1:1 NAT and 1:Many NAT."
Change: Added MA-SIMTRAY-2C and MA-SIMTRAY-5C to Accessories table.
Advanced Malware Protection (AMP)
Layer 3 and 7 Firewall Processing Order
A Guide to Troubleshooting Blocked Traffic
Content Filtering Powered By Cisco TalosMX Firewall Settings
Site-to-site VPN Firewall Rule Behavior
Connection Monitoring for WAN Failover
Creating a Layer 7 Firewall Rule
Network Objects Configuration Guide
Content Filtering Troubleshooting
Web Search Filtering and its Effect on Google Apps and Google Search
Troubleshooting a Faulty MX Appliance or Z-Series Teleworker Gateway
Change: Added references to free online training courses on the Meraki Learning Hub.
MS:
Switch Overview and Statistics
Change: Added Serial, Firmware, Config, VLAN Profile and Device uptime to the "Status" table.
MR:
Change: Added "Intelligent Capture".
Change: Added suggestion to not enable client balancing, because many clients and/or applications do not handle these rejections appropriately.
VusionGroup Electronic Shelf Labels (ESL) Integration with MRs
Changed: Added support for MR46E; added sections "ESL and Templates", "ESL and MT Coexistence in the Same Dashboard Network", "API Support" and "High Frequency ESL VusionGroup Firmware Upgrades"; added warning "All Bluetooth features (scanning/beaconing/scanning API), Electronic Shelf Labels, MQTT, and Door locks functionalities are mutually exclusive. Enabling either one of these features would prevent others from working."
Regulatory Domains for MR, MX, and Z-Series (Legacy Version)
Change: Added "MX and Z-Series products will not support a manual override of the regulatory domain. Contact Meraki Support in case of alerts."
SM:
Uninstalling Systems Manager and Removing Managed Devices
Change: Added "For iOS/iPadOS devices, the restrictions setting "Allow Erase All Content and Settings" should be enabled if you want to initiate a factory reset from the device itself (Settings > General > Transfer or Reset iPhone > Erase All Content and Settings). If the setting is disabled, the device can still be erased using the Apple Configurator by selecting Actions > Advanced > Erase All Content and Settings."
Systems Manager Supported Operating Systems
Change: Added "Windows Long-Term Servicing Channel (LTSC) (formerly Windows Embedded)" to section "Older Operating Systems".
MV:
Change: Added MV63M.
Change: Added MV93M.
Change: Added MV13M.
Change: Added MV33M.
Gen3 Meraki MV Mounting Options and Guidelines
Change: Added MV23 Series and MV73 Series.
Third Generation MV Cameras: Overview and Specifications
Change: Added MV63M, MV93M, MV13M, MV33M, MV23 Series and MV73 Series.
Change: Added retention estimates for MV63M, MV93M, MV13M, MV33M, MV23 Series and MV73 Series.
Change: Added archive specifications for MV63M, MV93M, MV13M, MV33M, MV23 Series and MV73 Series.
Meraki Vision Portal Changelog
Change: Added release notes for up to v1.22.6.
General Administration:
Trusted Access for Secure Wireless Connectivity - Setup Guide
Change: Added "Provision Owner Access".
Meraki MV Subscription Licensing
Change: Added MV13/MV13M, MV23/MV23M, MV33/MV33M, MV63M, MV73M/MV73X and MV93M.
Contacts for Webinar and CMNA, ECMS Equipment
Change: Added addtional information (FAQs) regarding ECMS1, ECMS2 and CMNA promo renewals.
Alert: This device is having difficulty contacting the Meraki Cloud
Change: Added additional alert reason (The upstream ISP provided modem may have traffic inspection security enabled); added note regarding Comcast modems or routers manufactured by SMC that have the "Gateway Smart Packet Detection".
Change: Added "The SMS alerts are limited to nodes going offline or coming online and sensor events." to section "Receiving Email Alerts via SMS".
Change: Added counting mechanism description for "Connection failures based on unique clients" in section "Anomaly Graphs" (last blue note).
Mapping Layer 7 Firewall Rules to NBAR IDs
Change: Updated NBAR ID of "Binary over HTTP" to 121.
Using Wireshark for Packet Captures
Change: Added references to free online training courses on the Meraki Learning Hub.
