New articles:
CW-ANT-GPS1-M Installation Guide
Change: New article.
Change: New article.
Change: New article.
Secure Connect:
Cisco Secure Connect - Design Overview
Get Started - Securing Access to Private Applications and Networks
Change: Added section "Client-based ZTNA".
Cisco Secure Connect - ZTNA Network Prerequisites & Troubleshooting
Change: Added sections "Requirements for Secure Client with Client-Based ZTNA" and "Troubleshoot Client-Based Zero Trust Network Access".
MX:
Change: Added security features to list of "Supported Features".
MS:
Change: Added sections "Storm Control", "Power Supply Settings" and "Network Client Sampling".
MS Switch Access Policies (802.1X)
Change: Added note regarding multi-VLAN assignment support when using multi-auth as the host mode for the MS390 and C9300-M.
MR:
Change: Update behavior of Dual 5 GHz mode: "When the CW9166D1 is operating in Dual 5 GHz mode, the 5 GHz radio in slot 1 operates only in the UNII-1 and UNII-2 bands (channels 36 to 64), and the radio in slot 2 is locked to the UNII-2-Extended and UNII-3 bands (channels 100 to 165)."
VusionGroup Electronic Shelf Labels (ESL) Integration with MRs
Change: Added V:Cloud destination URL and port information.
MV:
Change: Added "Ensure to avoid conflicting permission sets between Organization/Network role and camera roles. For example, do not pass a read only network role while also passing a full video access role for the same network."
Exports Page and Combining Exports
Change: Added section "Error Messages".
Change: Updated storage size for MV33-HW to 256 GB.
Meraki Vision Portal Changelog
Change: Added release notes for up to v1.23.4.
General Administration:
Moving Devices between Organizations
Change: Added "In the event a Subscription needs to be moved to another organization because the order was mistakenly claimed to the wrong organization within the past 7 days from order, please contact Support."; added "Splitting Subscription Licensing into 2 separate Subscriptions is not supported. Moving devices to a different Organization will require a new Subscription for the devices in the new Org where the devices were moved."
Organization Split Overview and FAQ
Change: Added "Org splits can not be done in an Org that has subscription at this time. Splitting Subscription Licensing into 2 separate Subscriptions is not supported."
Change: Added "Deleting a tag from all networks in an Organization will effectively delete the tag itself, and it must be recreated for use again."
Root Cause Analysis (RCA) - Alert Based Workflows
Change: Added port color coding for CRC errors. Amber: High amount of L1 packet errors. Red: Very High amount of L1 packet errors.
Resetting Cisco Meraki Devices to Factory Defaults
Change: Added section "CW Access Points".
Dashboard Alerts - Connectivity Issues
Change: Added "This alert may also be phrased as 'The Cisco Meraki Cloud is having difficulty communicating with this device'." to "Meraki Cloud Communication Issues".
Dashboard Alerts - Configuration Issues
Change: Added "This alert may also be phrased as 'The device is using a DHCP IP address from VLAN X instead of using configured VLAN Y'." to Device(s) VLAN Mismatch"; added "This alert may also be phrased as 'configuration is out of date'." to "Outdated/Unreachable Configuration".
Change: Added section "Existing Network Users".
Architectures and Best Practices:
MX and MS Basic Recommended Layer 3 Topology
Change: Added section "Incorrect Topology".
