New articles:
AI Assistant for Networking - Public Beta
Change: New article.
Change: New article.
Security Appliance:
Change: Updated Security Throughput to 500 Mbps.
Change: Updated Stateful firewall throughput for MX95 to 3 Gbps; updated Maximum VPN throughput for MX105 to 3.5 Gbps.
Change: Updated multiple throughput values for both MX250 and MX450.
Change: Added NAT Throughput and NGFW Throughput.
Change: Updated / added multiple throughput values.
Change: Added "Layer 3 Firewall rules do not apply to traffic destined for locations across both AutoVPN and Non-Meraki VPN. To configure Layer 3 Firewall rules for VPN destined traffic, refer to this KB."
Switching:
Change: Added "Contact your Meraki partner or reseller to confirm if a power cord is included with your order."
Changes: Added section "Removing a Port Profile".
Wireless:
Campus Gateway and MR - Wireless LAN
Change: Added references to free online training courses on the Meraki Learning Hub.
Wireless (MR) Firmware Features Directory
Change: Added Wi-Fi 7 access points.
Meraki Auto RF: Wi-Fi Channel and Power Management
Change: Added "Reason value 6 will be displayed for any changes triggered with AutoChannel."
Change: Added "Cisco Meraki deprecated the ability for customers to automatically integrate Cisco Umbrella (Umbrella) with their Meraki organizations on April 26, 2025. Therefore, this functionality is no longer included in the MR Upgrade and MR Advanced license types."
RADIUS Proxy for WPA2-Enterprise SSIDs
Change: Added "RADIUS CoA support is disabled. If enabled, then Dashboard RADIUS proxy cannot be configured."
Cameras:
MV Cloud Connectivity and Firewall Requirements
Change: Added sections "Example Firewall Info" and "Exposed interfaces at Factory Default State".
Sensors:
Change: Added "When adding SMS Recipients you must add the '+' sign and country code, then followed by the rest of the number (for example, +61123456789)."
General Administration:
Getting started on Packet Captures with Wireshark
Change: Added "IPsec VPN - Captures all of the Non-Meraki VPN traffic."
Meraki End-of-Life (EOL) Products and Dates
Change: Added MG51 and MG51E; updated end-of-sale date for MS350.
Throughput test to the Cisco Meraki Dashboard
Change: Added note if a throughput test result is 0 Mbps.
Creating and Deleting Dashboard Networks
Managing Multiple Networks with Configuration Templates
Change: Added "To enhance the security of customer networks, the encryption settings for the default SSID (enabled by default) have been updated starting Jun 10, 2025. When a Meraki administrator creates a new combined or wireless-only network, the default SSID's encryption setting will now use Password (WPA2 only) instead of Open (no encryption)."
Product Firmware Version Restrictions
Change: Added "Review the release notes under the Legacy products notice section to find the firmware version your network is using. Compare the current firmware version against the older firmware these nodes will run. For example, an MX84 appliance configured to run MX 18.211.6 will instead run MX 18.107.13."
Change: Added "Trials cannot be claimed on organizations using Subscription Licensing. For more information, see the Subscription - Licensing Overview article."
Change: Added "The Science behind Licensing Co-Termination FAQs".
