Client Balancing - Cisco Meraki
> Client Balancing Behavior - MR 29.X and Newer Firmware
> An AP can only attempt to load balance the client or reject an association request two times for both active and passive client balancing.
I've been waiting for this feature! 😍
In high-density wireless environments with many Meraki MRs, Client Balancing may in some cases continue to reject clients.
e.g. The wireless client goes to connect to MR#1 (reject) => MR#2 (reject) => MR#3 (reject) => MR#4 (reject) => MR#1 (reject) ... and so on.
It is good that a limit has been placed on the number of rejections.
I hope to improve the wireless environment!