New articles:
Meraki Wireless for Enterprise - Security
Meraki Wireless for Enterprise Best Practices- RF Design
Change: New articles.
Cloud Monitoring for Catalyst:
Cloud Monitoring Overview and FAQ
Change: Added section "Device-side routing changes" to "Known Issues/Caveats for Dashboard Monitoring".
MX / Z:
3G/4G Cellular Failover with USB Modems
Change: Added note that the MX does not support IPv6 through a USB cellular modem.
AnyConnect Client Download and Deployment
Change: Added AnyConnect / Secure Client download and configuration example for iOS.
AnyConnect Azure AD SAML Configuration
Change: Added note "If a port other than the default 443 is used the URLs should include the custom port"; added note "If a custom hostname is utilized the Identifier and Reply URLs should contain this custom hostname and not the Meraki DDNS name".
Change: Added warning that the Performance metrics detailed in this document are based on the Current Firmware Version listed above. It should be noted not all platforms can support MX 18.2x.
Security and SD-WAN (MX,Z) Features Directory
Change: Added "SD-WAN and SD-Internet APIs".
Change: Added requirement for routed mode BGP: MX must be running MX 18.205 or higher firmware.
Troubleshooting a Faulty MX Appliance or Z-Series Teleworker Gateway
Change: Added another troubleshooting step "Try performing a factory reset on the device and reconfigure its management IP as needed" to section "Appliance has a solid orange power LED".
Change: Added note to leave the Ports section of the Firewall Log empty for ICMP filtering.
IPSec VPN Port Overlap with Manual Port Forwarding rules
Change: Added section "Firewall Port Forwarding".
Change: Updated cutover date to April 30, 2024.
Change: Update note "To manage Client VPN users across all networks bound to a template, you can do so in the User Management section of the Security & SD-WAN > Client VPN page of said template. If you would like to manage Client VPN users for a specific network bound to that template, you can do so in the Network-wide > Configure > Users page of that network".
Z4/Z4C Series Hardware Installation Guide
Change: Added "2x External LTE Antenna".
MS:
Change: Added note that MAC addresses for "MAC allow list" or "Sticky MAC allow list" can be separated by a space, comma or by entering a new MAC on each line.
MS125 Overview and Specifications
Change: Updated Features table: "4x 1000/10000 Mbps SFP+ ports".
Product Firmware Version Restrictions
Change: Added maximum firmware version MS 15.23 for MS420.
MR:
Automatically Integrating Cisco Umbrella with Meraki Networks
Change: Added note that the Automatic Umbrella provisioning behavior for organizations using the Co-termination licensing model changed. Automatic Umbrella is no longer automatically provisioned when MR Advanced licenses or MR Enterprise + MR Upgrade licenses are claimed into a co-term organization (as of Jan 2024).
Change: Added note that AP Neighbors is an Early Access feature and can be enabled by browsing to Organization > Configure > Early Access.
Wireless Encryption and Authentication Overview
Change: Added section "Opportunistic Wireless Encryption".
MR57 Dual Uplink High Availability
Change: Added Link Aggregation state table regarding Power Sharing and High Availability.
MV:
Mobile App - Camera Experience
Change: Added section "Camera-only Administrator".
MT:
MT11 Probe Sensor Installation Guide
MT15 Installation Guide - Indoor Air Quality w/CO2
MT20 Installation Guide - Open/Close Detection
Change: Added / updated unboxing video.
SM:
Windows BitLocker Encryption with Meraki Systems Manager
Change: Added note that Bit-Locker Keys are not stored in Dashboard and it is up to the administrators to securely store them. They cannot be stored on the managed endpoint's drive(s) that is being encrypted.
Deploying Powershell and Shell Scripts in Systems Manager
Change: Added section "macOS - Add timestamp text to a file on desktop (schedule script test file)"; added note "Some features and user interface screenshots referenced in this document may change or be unavailable during the early access stage".
General Administration:
China Region Cloud Maintenance New IP Ranges 2023 FAQ
Change: Updated deadline to add the new IP ranges to March 31, 2024.
Meraki End-of-Life (EOL) Products and Dates
Change: Added Meraki Insight (MI) Licenses.
Change: Added note that Security Appliance policies applied for clients connected to a SSID with Meraki DHCP will not have an effect, as the client MAC and IP address will get NATed at the MR before reaching the Security Appliance.
Using Tags to Manage MR Access Points
Using Tags to Broadcast SSIDs from Specific APs
Change: Added note that although tags are case sensitive, it is advised to avoid using multiple capitalization variants and use completely unique tags per use-case.
Change: Added note "Per-Device Licensing (PDL), the Meraki mobile app and the Meraki Umbrella SDWAN Connector are currently not supported in the Meraki Canada Region".
Misc:
Change: Added references to free online training courses on the Meraki Learning Hub.
Change: Added requirement for routed mode BGP: MX must be running MX 18.205 or higher firmware.
Documentation says MX18.205 , but the dashboard says MX 18.207.
