Hi Community,
Below are the most important changes to our documentation between December 24th and February 24th:
How to unassign a queued license in PDL
Change: New article.
How to convert an org from Co-term to Per Device licensing
Change: New article.
MT14 High Sampling Mode
Change: New article.
MV93 Series Datasheet
MV63 Series Datasheet
Change: New articles.
Meraki Display Licensing
Meraki Display Hardware Guide
Change: New articles.
Cisco Meraki MR30H SES ESL Specifications
Cisco Meraki MR33 SES ESL Specifications
Cisco Meraki MR74 SES ESL Specifications
Cisco Meraki MR45 SES ESL Specifications
Cisco Meraki MR55 SES ESL Specifications
Cisco Meraki MR36 SES ESL Specifications
Cisco Meraki MR36H SES ESL Specifications
Cisco Meraki MR44 SES ESL Specifications
Cisco Meraki MR46 SES ESL Specifications
Cisco Meraki MR56 SES ESL Specifications
Cisco Meraki MR76 SES ESL Specifications
Cisco Meraki MR86 SES ESL Specifications
Change: New articles.
Cisco+ Secure Connect - Meraki SD-WAN Integration: Enhanced (early preview)
Change: New article.
Unidirectional Link Detection (UDLD)
Change: Added MS390.
Loop and MAC Flap Detection on MS
Change: Added note for MAC Flap Detection support on MS390.
MS390 Datasheet
Change: Added note that Meraki Support can't upgrade from Enterprise to Advanced licensing and a license upgrade must be purchased.
Approximating Maximum Clients per Access Point
Change: Added MR28 and MR78.
MR36H Installation Guide
Change: Added section about UTP jumper cable.
Manual Channel Selection, Transmit Power Adjustment, and Antenna Configuration
Transmit Power and Antenna Configuration
Change: Added note of UI behavior for single-radio MRs (MR12 and MR62). Will appear as "Off", even though not disabled.
MR28 Datasheet
MR28 Installation Guide
Change: Added note about supported power adapters.
SES-imagotag Electronic Shelf Labels (ESL) Integration with MRs
Change: Added reference to product specific SES ESL Specification KBs.
Frequently Asked Questions for Cisco Meraki Access Point Antenna
Change: Added all mounting and extension cable option SKUs.
Meraki Vision Changelog
Change: Added release notes for up to v1.7.2.
Hardware Guidelines for MV Video Wall Workstations
Change: Added section "Recommendations" and updates System Requirements.
Sensor Sight
Change: Added MV63(X), MV93(X), MT10 and MT12.
Meraki Display Introduction
Change: Changed from "Public Beta" to "Introduction".
Video Retention
Change: Added Gen 3 MVs to "Video Retention Expectations".
MV Encoding Improvements: Smart Codec
Change: Added Gen 3 MVs.
Manually Integrating Cisco Umbrella with Meraki Networks
Change: Added note to add an Umbrella DNS domain exclusion, if Walled Garden is used.
Meraki MX Security and SD-WAN Licensing
Change: Clarification on MX license edition moves.
Client VPN Overview
Change: Added note that Client VPN connections can only be established on the primary uplink.
IPv6 Support on MX Security & SD-WAN Platforms - Routing
Change: Added information about new "Routing page" as part of MX 18.1.
LLDP Support on Cisco Meraki Products
Change: Added note about MX84 sending out LLDP on VLAN 4095 in some configurations.
AnyConnect Authentication Methods
Change: Added note, that Meraki Support is currently not able to assist in Certificate-only authentication (in beta).
MG41/41E Technical Specifications
Change: Updated certified carriers.
Configuration Settings Payloads
Change: Various updates to multiple payloads.
Using the Systems Manager iOS App for Additional Functionality
Change: Added "Suggested Network Enrollment" and "Homescreen shortcuts", as well as added permission information about GPS tracking.
Systems Manager Sentry Enrollment
Change: Added "Suggested Network Enrollment".
Cisco Security Connector (CSC)
Change: General overhaul; e.g. added sections for "Per-App DNS" and "Per-App Content Filtering".
Alerts and Notifications
Change: Added MS125 to list of supported devices for critical temperature alert.
Alerts
Change: General overhaul; e.g. added section "List of alerts shown on the organization alert page".
Organization Settings
Change: Added "Manage visibility of Dashboard Banners".
Two-Factor Authentication
Change: Added sections "Using Duo Mobile for Two-Factor Authentication in Dashboard" and "One-Time Backup Codes".
Using the Organization Inventory
Change: Added note about claiming devices into a "holding organization" to actually claim device ownership.
Meraki System Maintenance Overview and FAQ
Change: Added impact of System Maintenance in regard to Systems Manager.
Meraki Authentication Server Certificate Rotation - Feb 2023
Change: Added FAQ "Is there any additional precautions which can be done to keep devices online?"
Returns (RMAs), Warranties and End-of-Life Information
Change: Added note about "Regional Return Policies"; added note about what to do if RMA creation fails; added Gen 3 MVs.
Cannot Add Devices Using Cisco Meraki Order Number
Change: Added note that claiming orders using the order # does not work, if the license key has already been claimed.
Meraki Licensing - License More Devices vs Renewal
Change: Added note on how to add multiple license if required at the time of renewal.
Cisco Meraki Devices purchased Second Hand
Change: Added FAQ about vendors resell Meraki devices and warranty status for resold devices.