New articles:
Multicast Overview, Configurations and Best Practices
Change: New article.
Managing Unified Licenses in EA
Change: New article.
Secure Connect:
Cisco Secure Connect - Client-based ZTNA
Change: Added "DNS resolution for private apps will come from the ZTA enforcement node in the CGNAT space 100.64.0.0/10."
MG:
Cellular Gateway (MG) Firmware Features Directory
Change: Updated table "Stable Release - MG 3.212 Firmware Features".
MX:
Change: Added FAQ "How can I verify my MX/Z is sending telemetry to Cisco XDR?"; added FAQ "Who should I call if I have questions about an incident detected by Cisco XDR?".
Change: Added section "IP Offset".
MX Warm Spare - High-Availability Pair
Change: Added VRRP timer value (3 seconds).
Using Site-to-site VPN Translation
Change: Added "VPN NAT can be configured via API on firmware 19.1+."
Change: Added section "BGP Path Selection Attributes".
vMX Setup Guide for Amazon Web Services (AWS)
Change: Added "If return routes for these subnets are not added to the AWS VPC route table via the steps listed above, bi-directional communication between hosts in remote AutoVPN subnets and AWS resources will not occur, as return traffic will not be routed to the vMX."
Change: Added "Statically defined local routes configured on passthrough MX devices are not exported to the eBGP peer over IPsec."
MS:
Adaptive Policy MS Configuration Guide
Change: Updated SGT order of operation for classification.
Change: Added MS130 Licensing.
Change: Added C9300L models.
MR:
Change: Added "The Cisco Wireless CW917x series of Access Points is a Unified Hardware with a single product ID, that can be deployed with a Cisco Catalyst 9800 Wireless LAN Controller or Meraki Cloud based deployments. The CW917x series Access Points can be deployed anywhere in the world just with the single product ID (PID or SKU) and avoids the need to buy a region or country specific access point hardware based on regulatory domain. Please refer to the Global Use AP deployment guide for details."
Change: Added "Due to the 6 GHz band requiring PMF some Air Marshal functions may not be effective"; added peak antenna gain for the second 5 GHz antenna.
Wireless (MR) Firmware Features Directory
Change: Added "Intelligent capture" to section "MR 30.X Firmware Features"; updated description of the "Intelligent capture (Proactive PCAP)" in section "MR 31.1.X Firmware Features".
Low Power Mode on Cisco Switches
Change: Added "UPoE" to table "PoE Standards".
Splash Page Traffic Flow and Troubleshooting
Change: Added note regarding the splash URL: "In some configurations, [nX] may be replaced by a region-specific string. For example, networks located in the Asia-Pacific region may see the splash URL https://apac.network-auth.com/splash/?".
WPA3 Encryption and Configuration Guide
Change: Updated regarding Wi-Fi 7.
MV:
MV72 Series Installation Guide
Change: Added optional installation step 4 regarding the MV72's optional external grounding screw.
Meraki Vision Portal Changelog
Change: Added release notes for up to v1.23.6.
General Administration:
Product Firmware Version Restrictions
Change: Added Z3 / Z3C maximum firmware version.
Change: Added "Intelligent Capture is currently in the Early Access Phase. There is no MR-ADV license requirement for the Proactive PCAP feature during the Early Access Period. See the MR License Guide for more details."
Meraki Assurance Overview Page
Change: Added section "Configuration Changes Timeline".
Change: Added note about sender e-mail address and recipients of the firmware upgrade alert email.
Managing Dashboard Administrators and Permissions
Change: Added section "E-mail Subaddressing".
Change: Added "Additionally, providing case details before connecting with phone support helps our Support team understand your issue and assign the most appropriate engineer for your case."
Change: Added "Login attempts logs for up to the last 12 months can be requested by contacting Meraki Support."
Change: Added section "Accessing with Mobile App".
Change: Updated "Dashboard can maintain event logs for up three months, which can be viewed for historical purposes unless Network-Wide > Configure > General > Client privacy has been configured for a shorter timeframe."
Change: Added "Consumption will happen when a device is added to a Network associated with your EA, regardless of its active or inactive status. When a device is part of a network, it will trigger consuming a license."
