Apple Configurator Enrolled MacBooks not received DEP settings

SOLVED
_aDiedericks
Getting noticed

Apple Configurator Enrolled MacBooks not received DEP settings

Hi there,


We've recently found an issue with assigning DEP/ADE settings to some devices after they've been enrolled into ABM via Apple Configurator.

The devices show up in Meraki but the moment we assign DEP/ADE settings to the device, the device reaches the profile enrollment screen during Setup Assistant but failed with the below error.

This doesn't happen 100% of the time and isn't network related.

 

The behaviour we see is that once we see this error and go onto ABM we see that even though the Meraki MDM profile is assigned to the device, it unassigns after this error and is removed from ADE/DEP list on Meraki.

My suspicioun is that because we're trying to deploy the MDM to the device immediately after enrolling it into ABM using Apple Configurator, that there may be a Apple push cert issue. Might be that the device is rejecting the configs based on Apple cert not being assigned or provisioned to the device just yet. I have no means to confirm this, I'm not sure on how the backend of Apple Push propagate 

 

 


Image from iOS.jpg

1 ACCEPTED SOLUTION
PaulF
Meraki Employee
Meraki Employee

So, once step that many people miss is assigning the device to a network when it appears in the ADE list in Meraki. This is a step unique to Meraki SM as it has the ability to partition SM into Virtual MDM instances:

 

Screen Shot 2022-08-08 at 1.42.35 PM.png

 

You'll note that each device is assigned to a Network. You can do this in two ways

 

Either assign the devices to a network like this:

 

Screen Shot 2022-08-08 at 1.45.29 PM.png

 

or ensure that there's a default network in Organization > MDM

 

Screen Shot 2022-08-08 at 1.45.44 PM.png

 

View solution in original post

1 REPLY 1
PaulF
Meraki Employee
Meraki Employee

So, once step that many people miss is assigning the device to a network when it appears in the ADE list in Meraki. This is a step unique to Meraki SM as it has the ability to partition SM into Virtual MDM instances:

 

Screen Shot 2022-08-08 at 1.42.35 PM.png

 

You'll note that each device is assigned to a Network. You can do this in two ways

 

Either assign the devices to a network like this:

 

Screen Shot 2022-08-08 at 1.45.29 PM.png

 

or ensure that there's a default network in Organization > MDM

 

Screen Shot 2022-08-08 at 1.45.44 PM.png

 

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels