Recently I received a Meraki MS120-8LP after attending a Webinar and was excited to try it out with our network. Our main office already had 7 MR52 APs but the APs were connected to our Cisco 2960-X. I moved them to the new MS120 but ran into an issue of having incorrectly setting the VLan when setting static IPs for the APs. After reviewing the community I came across the information needed to correct this. The 7 APs are now running off the MS120 and I was excited to see how the topology works with the added switch. We are hoping to move our main office a MX100 with next years budget. Should be exciting.