Hahahaha, excellent.

I’ve not managed a zero touch deployment yet. The phrase should be renamed Light-touch.

He still fits between the rails! 😛

Note that you have to raise a case with support to enable power stacking.  Just plugging in the power stack is not enough.

hi Philip, Is that still applicable for version 14.x ? I started with 12.28/12.30 and in these version we encountered some issue (esp. with the stacks with more than 4 members..)

You can test it by removing power from one switch and see if it powers down.  It should remain powered up via the power stack cables if it is working.