MX port information on app!

Solved
cmr
Kind of a big deal
Kind of a big deal

MX port information on app!

The current Android version of the Meraki app shows which port of an MX a connected AP is plugged into, which is very useful. 🙂.

 

Of course it uses the Split WAN/LAN port numbering schema, but it's better than the dashboard that just shows the device!  As an example on an MX75 the two PoE ports are reported as port 8 and 9.

 

Hopefully this will come to the web dashboard and not be deleted from the app 🤞

If my answer solves your problem please click Accept as Solution so others can benefit from it.
1 Accepted Solution
cmr
Kind of a big deal
Kind of a big deal

Still there in the new app with the new logo, but not on the equivalent page on the dashboard.  However the APs are see as clients and on that page, the port is reported correctly.

 

Come on Meraki, please finish this part of the UI, the work is mostly done!

If my answer solves your problem please click Accept as Solution so others can benefit from it.

View solution in original post

1 Reply 1
cmr
Kind of a big deal
Kind of a big deal

Still there in the new app with the new logo, but not on the equivalent page on the dashboard.  However the APs are see as clients and on that page, the port is reported correctly.

 

Come on Meraki, please finish this part of the UI, the work is mostly done!

If my answer solves your problem please click Accept as Solution so others can benefit from it.
Get notified when there are additional replies to this discussion.