- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
GX50 Site-to-site VPN
I'm looking to set up site-to-site VPN with GX50. I currently have one site with one and will be adding a separate location soon for a few workers out of state. They'll mostly be using the larger volume printers in the 1st location. My question is: when setting up the 2nd location, does it need to have the same IP range, or do I not want that?
For example, location 1 has PCs and printers on 192.1.10.1
Should location 2 use the same IP range, or should it be on a separate one such as 192.168.20.1?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hey Jim
I might be wrong but isnt the GX50 Client VPN only not site to site
Regards
Daren
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
It was recently updated to support site-to-site if using a GX50 in both locations.
https://documentation.meraki.com/Go/Features/Meraki_Go_-_Site_to_Site_VPN
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hey Jim
I stand corrected.
Daren
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Different range though
HQ 192.168.0.0
Site1 192.168.1.0