Alternativ to Cisco Meraki Go GS110-8-HW-EU switch

TRHH
Here to help

Alternativ to Cisco Meraki Go GS110-8-HW-EU switch

Hi

 

I am looking for an alternativ to my current Cisco Meraki Go GS110-8-HW-EU switch. Having problems with 2 ports so I need a new switch

 

  • Ports: 8 x 10/100/1000BASE-T (can be more)
  • Additional ports: 2 x SFP (can be more)
  • PoE: No
  • Manageable: No
  • Switching Layer: Layer 2
  • Version: European
  • Switch type: desktop
  • DC

 

Thanks for any suggestions

 

Torben

8 Replies 8
Xydocq
A model citizen

hello @TRHH 

 

you can get any managed or unmanaged switch you want. It will work. I use switches from TP-Link, Netgear and Zyxel. GX20 and GR12 are the only Meraki Go devices I have.

 

If you choose a managed switch you'll have to use the management-console the switch comes with.

 

hope this helps

DC3
Here to help

Aruba InstantOn is what I'm planning on looking into:

 

Aruba Instant On 1930 8-Port Gigabit Managed Switch JL680A#ABA (bhphotovideo.com)

 

I'm not sure if there is an EU option or not.

TRHH
Here to help

Looks very interesting - THX. But it seems to be a Managed Switch. The problem ist that I don't have the knowledge about the settings that need to be done in a Managed Switch. That was great with Cisco Meraki Go GS110-8-HW-EU switch

 

Torben

DC3
Here to help

I believe there are unmanaged options for Aruba InstantOn switches.

 

A managed switch will usually operate out of the box like an unmanaged switch in most cases, so you really don't need to know a lot. They're usually configured out of the box to just use a default VLAN, so I wouldn't think it would be an issue for you, but I'm not an expert on the subject either. 

Xydocq
A model citizen

the "official" recommandation for switches is Cisco Business 110 Series Unmanaged Switches - Cisco Business 110 Series Unmanaged Switches - Cisco

but as I said, any unmanaged switch will work too.

TRHH
Here to help

THX - but I need with 2 SFP ports as I am using Finisar FTLF1318P3BTL (SFP). The Finisar FTLF1318P3BTL works fine with Cisco Meraki Go GS110-8-HW-EU

 

Torben

Xydocq
A model citizen

I usually don't make recommandations, but the Zyxel switch XGS1010-12 might fit your needs.

 

It is unmanaged, offers 8 1G ports, 2 2.5G ports and 2 SFP+ ports.

 

TRHH
Here to help

THX 🙂

 

Here is my shortlist:

 

  • Qnap - QSW-2104-2S - (Finisar FTLF1318P3BTL SFP - should actually work because there is support for SFP transceiver 1000BASE-LX)
  • Mikrotik - CSS610-8G-2S+IN - (OK with Finisar FTLF1318P3BTL SFP)
  • HPE - Aruba Instant On 1930 8G Switch (JL680A#ABB) - (Finisar FTLF1318P3BTL SFP ?)
  • ZyXEL - XGS1010-12 - (Finisar FTLF1318P3BTL SFP ?)

Not sure if they all work with my SFP - Finisar FTLF1318P3BTL

 

Torben

 

 

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.