Packet capture

Dandri
Here to help

Packet capture

Hello i´m playing with packet capture on my MR18 to try to see the traffic from a meraki NAT/DHCP network to my router. The problem i´m having is that i can not see the traffic from between my L3 switch to my router.

 

Setup is like this: Router > L3 Switch >  Switch > MR18

 

 

 

 

6 REPLIES 6
ww
Kind of a big deal
Kind of a big deal

did you select the wired interface?

cant you start the trace on the l3 switch or router?

Dandri
Here to help

I selected the wired interface.

I recon i will just plug in to the router and try it from there yeah
PhilipDAth
Kind of a big deal

You are using the SSID option where the SSID is configured to use NAT?

 

If so, the MR18 processes the DHCP traffic, not your router.

Yes i am using the Meraki NAT option.

I am essentially trying to see the internet traffic that passes from between the MR18 and my router.

PhilipDAth
Kind of a big deal

 

@ww should be right, you should be able to do a packet capture on the wired interface of the MR18. Note that because the traffic has already been NATed you'll only see traffic to and from the MR18 IP address.

 

ahh i see, i was interested in finding out if i could see how they NATed between the devices.

Thank you
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.