SecurePort (formerly known as SecureConnect)

cmr
Kind of a big deal
Kind of a big deal

SecurePort (formerly known as SecureConnect)

Does SecurePort not work with the MS130, any of the C9x00 switches, the CW9163E or the CW9166D1?  If it does then please update here:

 

cmr_0-1727282144123.png

On a non-documentation note, if you try to enable it in a network that only has unsupported switches the error message still references SecureConnect:

 

cmr_1-1727282302852.png

 

 

If my answer solves your problem please click Accept as Solution so others can benefit from it.
4 Replies 4
RaphaelL
Kind of a big deal
Kind of a big deal

Bookworm is proud of you cmr. 

 

Also I found this in the Alert Hub of my org :

 

RaphaelL_0-1727286860902.png

I opened a case about it.

cmr
Kind of a big deal
Kind of a big deal

It was only renamed about 2 years ago, the cloud needs time to absorb the change... 😉

If my answer solves your problem please click Accept as Solution so others can benefit from it.
PhilipDAth
Kind of a big deal
Kind of a big deal

I would like to use this feature, but I never had a combination of hardware together that it works with.

rhbirkelund
Kind of a big deal
Kind of a big deal

They might also want to mention that SecurePort is not supported in combination with SmartPort Automations.

LinkedIn ::: https://blog.rhbirkelund.dk/

Like what you see? - Give a Kudo ## Did it answer your question? - Mark it as a Solution 🙂

All code examples are provided as is. Responsibility for Code execution lies solely your own.
Get notified when there are additional replies to this discussion.