MR Hospitality Design Guide (CVD) still references MR30H and not MR36H

Solved
cmr
Kind of a big deal
Kind of a big deal

MR Hospitality Design Guide (CVD) still references MR30H and not MR36H

Some of the document has been updated to the MR36H, but this part still mentions the MR30H

cmr_0-1727269763261.png

Lower down should CW models now be mentioned alongside the MRs?

cmr_1-1727269858357.png

 

Finally the "Was this article helpful?" buttons at the bottom appear not to function.

 

 

If my answer solves your problem please click Accept as Solution so others can benefit from it.
1 Accepted Solution
Kevin_R
Meraki Employee
Meraki Employee

Hello cmr,

 

Thank you for the article feedback! The article has been updated to no longer reference MR30H, as this device is end of sale.

 

With regards to the "Was this article helpful? 🙂 Yes ☹️ No" buttons, these buttons do not change to show a vote being sent by the voter, but rest assured that a vote is sent to our system when the buttons are used. 

If you found this post helpful, please give it kudos. If my answer solved your problem, click "accept as solution" so that others can benefit from it.

View solution in original post

2 Replies 2
Kevin_R
Meraki Employee
Meraki Employee

Hello cmr,

 

Thank you for the article feedback! The article has been updated to no longer reference MR30H, as this device is end of sale.

 

With regards to the "Was this article helpful? 🙂 Yes ☹️ No" buttons, these buttons do not change to show a vote being sent by the voter, but rest assured that a vote is sent to our system when the buttons are used. 

If you found this post helpful, please give it kudos. If my answer solved your problem, click "accept as solution" so that others can benefit from it.
cmr
Kind of a big deal
Kind of a big deal

Thanks @Kevin_R and what a super speedy correction.  Top marks 😎

If my answer solves your problem please click Accept as Solution so others can benefit from it.
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.