Documentation addition - TCN Switch_Port_View

[RaphaelL]

Hi ,

The section "Packets" from : https://documentation.meraki.com/MS/Monitoring_and_Reporting/Switch_Port_View

should now include 'Topology changes' 

This section displays detailed packet information in relation to the selected switch port, including the total, sent, received and rate values for Total, Broadcast, and Multicast traffic. This table will also display counters for CRC align errors, Fragments, and Collisions. An example is provided in figure 3 below.

Suggestion :

This section displays detailed packet information in relation to the selected switch port, including the total, sent, received and rate values for Total, Broadcast, and Multicast traffic. This table will also display counters for CRC align errors, Fragments, Collisions and Topology Changes. An example is provided in figure 3 below.

And update the corresponding screenshot 🙂

Thanks ! 

[FeliA]

Hello @RaphaelL,

Great catch! Thank you 🙂
Your suggestions have been forwarded, and I'll provide an update once these adjustments are complete.

[FeliA · Accepted solution]

Hi @RaphaelL,

The edits to the documentation are now complete. Much appreciated.

Best,

Feli