Specific SSID Parameters - Python API Setup

SOLVED
KRobert
Head in the Cloud

Specific SSID Parameters - Python API Setup

I am trying to setup a python script to manipulate the following. Has anyone run into this and have you been able to modify these parameters via the API successfully?

 

MR Networks

Manipulate the Addressing and Traffic section of the Access Control Menu for an SSID.

          Change NAT mode to Bridge mode

          Enable VLAN Tagging and add a VLAN

 Enable Layer 2 LAN Isolation in the Firewall and T-Shaping menu.

 

MX65W and MR networks

Hide the SSID

CMNO, CCNA R+S
1 ACCEPTED SOLUTION

@KRobert You may want to apply for the developer early access. I can see that the dashboard v1 beta API has a lan_isolation_enabled feature. Nothing on selectively broadcasting SSIDs based on AP tags though (unless I overlooked it).

View solution in original post

3 REPLIES 3
Nash
Kind of a big deal

I've changed addressing mode, vlan tagging, and added a vlan.

 

I'm not seeing an API endpoint that addresses l2 LAN isolation on the MR firewall. The only MR firewall calls I see relate to the L3 firewall.

 

I'm not seeing anything to modify the SSID availability... anyone else see something I'm not?

SoCalRacer
Kind of a big deal

I don't see the LAN Isolation in there.

@KRobert You may want to apply for the developer early access. I can see that the dashboard v1 beta API has a lan_isolation_enabled feature. Nothing on selectively broadcasting SSIDs based on AP tags though (unless I overlooked it).

Get notified when there are additional replies to this discussion.