Meraki MX, MR and MS SNMPwalk output examples

[mlaskowski-r7]

Hi All!

I'm writing a regex for a security scan which will help me identify which Meraki device I'm dealing with.

I have access to two Meraki MX devices which when asked for 

system.sysDescr.0: would return, e.g.: 

- Meraki MX68 Router/Security Appliance

- Meraki MX84 Cloud Managed Router

Unfortunately I neither Meraki MS nor Meraki MR are within my reach at the moment to test it myself. 

Based on Cisco website and with ChatGPT's help I've put together such examples:

MS:

- Cisco Meraki MS120-8LP Cloud Managed Switch

- Cisco Meraki MS425-40G Cloud Managed Switch

MR:

- Meraki MR20 Cloud Managed AP 

- Meraki MR53E Cloud Managed AP

Would any of you be aware of what could be the output/able to confirm if my guesses are correct?

Thanks!

[alemabrahao]

I suggest you open a support case.

[alemabrahao]

You can also try testing it yourself.

https://documentation.meraki.com/General_Administration/Monitoring_and_Reporting/SNMP_Overview_and_C...

[mlaskowski-r7]

Thanks, Alessandro. That's really useful. I'm having some knowledge gap on this one but will be really useful to fill it. 🙂

[JasonM · Accepted solution]

Hi @mlaskowski-r7,

My lab shows the following for the MS and MR, respectively. Hopefully this helps. Cheers!

SNMPv2-MIB::sysDescr.0 = STRING: Meraki MS120-8LP Cloud Managed PoE Switch
SNMPv2-MIB::sysDescr.0 = STRING: Meraki MR46E Cloud Managed AP

[mlaskowski-r7]

Thank's a lot Jason! 🙂