Configure WLAN via API on a MX

SOLVED
codesie
Conversationalist

Configure WLAN via API on a MX

Hi all,

we have over 700 hundred "MX68CW" deployed. We have done this all by API, which is great 🙂 but now we need to create a WLAN on most of this MXs. We need to create the SSID, the authentication(WPA2), the password and set the wlan to hidden. Unfortunately I found nothing about that in the API documentation.

Is it possible to make this configurations by API? Or do we have to configure this WLAN on every device by hand?

I am very thankful for your inputs.

Best regards Joel

1 ACCEPTED SOLUTION
HitoshiH
Meraki Employee
Meraki Employee

Creating SSIDs by API POST request that seems not available yet unfortunately.

 

Alternative idea for you to deploy SSIDs for your wireless networks would be using the configuration template.

You can create a template and bind it to all of target networks which would reduce your operation for setup and any changes in future much if all of wireless networks are designed and configured same.

 

KB: https://documentation.meraki.com/zGeneral_Administration/Templates_and_Config_Sync/Managing_Multiple...

 

Hope this would help some!

 

~~If you found this post helpful, please give it kudos. If my answer solved your problem, click "accept as solution" so that others can benefit from it.~~

The Meraki ECMS exam is now live! Test your knowledge of Meraki and become an official Cisco Meraki Solutions Specialist. More info on the ECMS exam found here.

For information regarding all of Meraki's training offerings, be sure to check out the Meraki Learning Hub.

View solution in original post

2 REPLIES 2
HitoshiH
Meraki Employee
Meraki Employee

Creating SSIDs by API POST request that seems not available yet unfortunately.

 

Alternative idea for you to deploy SSIDs for your wireless networks would be using the configuration template.

You can create a template and bind it to all of target networks which would reduce your operation for setup and any changes in future much if all of wireless networks are designed and configured same.

 

KB: https://documentation.meraki.com/zGeneral_Administration/Templates_and_Config_Sync/Managing_Multiple...

 

Hope this would help some!

 

~~If you found this post helpful, please give it kudos. If my answer solved your problem, click "accept as solution" so that others can benefit from it.~~

The Meraki ECMS exam is now live! Test your knowledge of Meraki and become an official Cisco Meraki Solutions Specialist. More info on the ECMS exam found here.

For information regarding all of Meraki's training offerings, be sure to check out the Meraki Learning Hub.
codesie
Conversationalist

Hi HitoshiH

Thanks a lot for your feedback. I will have a look at your suggestion.

Best wishes

Joel

Get notified when there are additional replies to this discussion.