API to identify Access point in Repeater mode

Solved
Farrukh
Getting noticed

API to identify Access point in Repeater mode

When we connect a new AP it turns in to repeater mode is their is an API to identify that the AP is in  Repeater mode 

1 Accepted Solution
CBurkhead
Building a reputation

There is no API call for this that I know of, but you can get a good idea if an AP is in repeater mode by checking the online status of the AP and seeing if it is offline. If it is not and the AP does not have a LAN IP, it is probably in repeater mode.

View solution in original post

4 Replies 4
PhilipDAth
Kind of a big deal
Kind of a big deal

I have not seen such an API.

CBurkhead
Building a reputation

There is no API call for this that I know of, but you can get a good idea if an AP is in repeater mode by checking the online status of the AP and seeing if it is offline. If it is not and the AP does not have a LAN IP, it is probably in repeater mode.

Thanks I will try it

You may also find the alert useful Network-wide Alerts:

image.png

Get notified when there are additional replies to this discussion.