cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

API support for Z-series

SOLVED
Building a reputation

API support for Z-series

Hi,

 

I have an app that gets access rules, interface data form MX devices. I'm looking at the API docs for support on the Z-series devices. I don't see any APIs for getting access-rules, VPN, VLANs, etc.. similar to the MX. Since the Z-series are Firewalls, will the MX specific APIs work for the Z-series?

 

Thank you,

-Jerome

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Meraki Employee

Re: API support for Z-series

Yes @diablo24, should work the same.  I just confirmed, ran a quick Postman test to get the FW rules off my Z1 appliance using GET https://api.meraki.com/api/v0/networks/:networkId/l3FirewallRules and it worked fine.

 

View solution in original post

4 REPLIES 4
Highlighted
Meraki Employee

Re: API support for Z-series

Yes @diablo24, should work the same.  I just confirmed, ran a quick Postman test to get the FW rules off my Z1 appliance using GET https://api.meraki.com/api/v0/networks/:networkId/l3FirewallRules and it worked fine.

 

View solution in original post

Highlighted
Building a reputation

Re: API support for Z-series

Thanks @MerakiDave 

Highlighted
Getting noticed

Re: API support for Z-series

The basic things work yes, however if you want to do something on the wireless then you will face some problems. Same like the MX67 or MX68.... They have a different chips set and you are not able to change the wireless network configs. At least not the way you are used to with the MR series

 

 

Highlighted
Building a reputation

Re: API support for Z-series

@Edgar-VOThanks for the heads-up.

Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.