cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

API support for Z-series

SOLVED
Highlighted
Getting noticed

API support for Z-series

Hi,

 

I have an app that gets access rules, interface data form MX devices. I'm looking at the API docs for support on the Z-series devices. I don't see any APIs for getting access-rules, VPN, VLANs, etc.. similar to the MX. Since the Z-series are Firewalls, will the MX specific APIs work for the Z-series?

 

Thank you,

-Jerome

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Meraki Employee

Re: API support for Z-series

Yes @diablo24, should work the same.  I just confirmed, ran a quick Postman test to get the FW rules off my Z1 appliance using GET https://api.meraki.com/api/v0/networks/:networkId/l3FirewallRules and it worked fine.

 

View solution in original post

4 REPLIES 4
Highlighted
Meraki Employee

Re: API support for Z-series

Yes @diablo24, should work the same.  I just confirmed, ran a quick Postman test to get the FW rules off my Z1 appliance using GET https://api.meraki.com/api/v0/networks/:networkId/l3FirewallRules and it worked fine.

 

View solution in original post

Highlighted
Getting noticed

Re: API support for Z-series

Thanks @MerakiDave 

Highlighted
Getting noticed

Re: API support for Z-series

The basic things work yes, however if you want to do something on the wireless then you will face some problems. Same like the MX67 or MX68.... They have a different chips set and you are not able to change the wireless network configs. At least not the way you are used to with the MR series

 

 

Highlighted
Getting noticed

Re: API support for Z-series

@Edgar-VOThanks for the heads-up.

Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.