API Call for MX LAN IP NO VLAN

[bowersjj]

Is there an API call for POST/PUT LAN IP address of an MX that isn't using vlans?

[MacuserJim]

Something like this? This API will allow you to set the MX IP of that VLAN.

I typically use Python so here is a link to the Git for that. (if you search the page for "updatevlan" you'll find that API) - https://github.com/meraki/dashboard-api-python/blob/master/meraki.py

Then here is the postman API documentation for that as well (the screenshot is from here) - https://documenter.getpostman.com/view/897512/meraki-dashboard-api/2To9xm#eaad6d04-2a0b-0c4b-fc37-87...

[bowersjj]

This applies to "Vlans Disabled: Use a single LAN configuration"

API call to getvlans for a MX single lan configured with an IP shows ['VLANs are not enabled for this network'].

The assumption is if getvlans can't see a configuration, then addvlan will fail as there is no 'id' or 'name' to reference.

There doesn't appear to be an API call for a single lan configuration scenario.

Where you at Meraki?

[bowersjj · Accepted solution]

Meraki support verified there is no API endpoint for modifying the MX subnet without having VLANs enabled on the network.

Feature request has been submitted.