Local status page para configurar ppoe

SOLVED
Schneyder
New here

Local status page para configurar ppoe

Buenas tardes, estoy intentando entrar al local status page para configurar pppoe pero al ingresar a la parte de Configure, me pide un usuario y una contraseña, al ingresar mi usuario de Meraki no me acepta y dice que es incorrecto.

Saben si hay alguno por defecto o cual seria el usuario que se debe ingresar?

 

colabora local.PNG

 

 

 

 

1 ACCEPTED SOLUTION

Correct, enter the 12-character serial number (including the hyphens) as the username, with a blank password field.  Check the doc here for more info.  https://documentation.meraki.com/zGeneral_Administration/Tools_and_Troubleshooting/Using_the_Cisco_M...

 

View solution in original post

2 REPLIES 2
jdsilva
Kind of a big deal

Enter the device serial number as username. Leave password blank.

Correct, enter the 12-character serial number (including the hyphens) as the username, with a blank password field.  Check the doc here for more info.  https://documentation.meraki.com/zGeneral_Administration/Tools_and_Troubleshooting/Using_the_Cisco_M...

 

Get notified when there are additional replies to this discussion.