Access Point as reapeter

[Kevin_Monsta]

Hi, anybody know why AP can not stand alone as AP? i have 1 AP that connected as repeater even i have set the IP before. it connected to switch and not using power adaptor

[RWelch]

If the AP is configured with a static IP, it will advertise "ssid name-bad gateway" when the default gateway is unavailable. If it has no other APs to mesh with that provide a route to the Internet, the AP will remain offline.

If it does find another AP with a route to the Internet, it will act as a repeater but the Dashboard will report that it has an invalid IP configuration.

Gateway AP Switches to Repeater Mode 

[Kevin_Monsta]

i cant open the link

[RWelch]

Try to re-open the link now.  Apparently there was an issue earlier where ever the documents reside.

[Service Notice] Documentation.meraki.com unavailable 

[alemabrahao]

It's very likely that this isn't connecting to the internet.

Can you verify the IP address configured on the dashboard when it's set up as a repeater?

Try performing a factory reset 

[Kevin_Monsta]

we have set the IP, but we cant change the IP then. the IP not shown on dashboard.

this is new AP, should i do factory reset?

[alemabrahao]

Try performing a factory reset please.