Bandwidth quota limit for wireless client

Indian1
Comes here often

Bandwidth quota limit for wireless client

Hi all,

 

Is there any technic to set quota limit for wireless client in meraki dashboard. I want to set quota limit for those clients who have exceeded bandwidth  .

 

For example - Quota for one day let assume - 50MB, If client excided for than set bandwidth quota limit 50mb then can't access anything and there should display on prompt message that you have used bandwidth set quota 50mp.

 

 

your response would be more appreciable.

 

 

Thank you

 

  

2 Replies 2
DarrenOC
Kind of a big deal
Kind of a big deal

You can’t set quotas but you can set bandwidth limits 

 

https://documentation.meraki.com/MR/Firewall_and_Traffic_Shaping/Traffic_and_Bandwidth_Shaping#:~:te....

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.
DarrenOC
Kind of a big deal
Kind of a big deal

https://documentation.meraki.com/MR/Firewall_and_Traffic_Shaping/Configuring_Bandwidth_Limitations_a...

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels