-削除-

解決済み
a-ueno
Conversationalist

-削除-

-削除-

1 件の受理された解決策
RWelch
Kind of a big deal
Kind of a big deal

Yes it is possible.

If you found this post helpful, please give it Kudos. If my answer solves your problem please click Accept as Solution so others can benefit from it.

元の投稿で解決策を見る

2件の返信2
RWelch
Kind of a big deal
Kind of a big deal

Yes it is possible.

If you found this post helpful, please give it Kudos. If my answer solves your problem please click Accept as Solution so others can benefit from it.
RWelch
Kind of a big deal
Kind of a big deal

FirmwareConventions.png

Best Practices for Meraki Firmware 

 

In the example you mentioned above, both are MX18.211 with one having a minor upgrade so they aren't too far off.  In general, you might test one location or separate test equipment for firmware releases then transition all sites once you have deemed them to work as expected.

If you found this post helpful, please give it Kudos. If my answer solves your problem please click Accept as Solution so others can benefit from it.
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco ID. If you don't yet have a Cisco ID, you can sign up.