Meraki

stewart323 · ‎Jun 16 2023

Hi Alemabrahao, Whilst i appreciate a response, it isn't a client issue, antennae issue, channel saturation or any environmental issue for that matter. I understand that this was my first post, but i am a competent network engineer. Thankyou for the info regarding the MX, i am aware of this. As mentioned, wired speeds are >600, I assume there is some tolerance. I'm almost certain this is some traffic shaping happening on the meraki sirde, as my speed test are consistently 197/198/199 but never more. All slider are set to unlimited. I have created new SSID with standard profiles etc to no avail. Wondering if it is a firmware issue, as have a similar setup with the only difference being the MR's on 29.4.1

stewart323 · ‎Jun 16 2023

Morning. I have run into a frustrating issue at a client site, where my wireless speeds appear to be capping out at 200mb. The WAN is 800 up/down, and i am seeing these results, on the wired clients (client -> ms210 -> mx68). 22 MR44 AP's throughout the property (19 wired, 3 repeaters, surveyed with Ekahau, 5ghz channels manually modified etc). Firmware 29.5.1. Something on the Meraki side is shaping this traffic irrespective of what settings I configure. Any suggestions welcome.

Meraki

Community

About stewart323

stewart323

Community Record

Re: Meraki MR44 Wireless speed 'capped' at 200Mb

Meraki MR44 Wireless speed 'capped' at 200Mb