Have an SSID that is configured for WPA2-Enterprise using Radius/802.1x-PEAP.  802.11w is set to required.  SSID is running in NAT mode.   At times I am seeing errors like the following:   Client made an 802.1X authentication request to the RADIUS server, but it did not respond. auth_mode='wpa3-802.1x' radius_proto='ipv4' radius_ip='192.168.xxx.xxx' reason='radius_login_failure' radio='0' vap='3' channel='6' rssi='42'   The client is configured for WPA2.  The client was successfully connected and then all the sudden couldn't roam to this AP and the above error was seen in the connection log.  Eventually, with no changes to the client or on the dashboard, the client was able to connect.   APs are MR42s and they are running MR 29.4.1 ... View more