howdy -   my first post here.   i have setup gr10 access points (4 for now) and currently 3 ssid's (two guest and one all access). and will create a 4th depending on what answers i get here.   verizon is the main router and handing out ips now. a netgear unmanaged 24 port switch.   there is a nas (freenas) serving ftp and smb traffic at a fixed ip.   here is what i need to do but really cannot figure this out via google searches or fellow cisco folk.   - i would like to setup a wireless vlan for the church staff (all access to resources) - give wired their own vlan but still full access to all resources. - create a special ssid to only access a single ip (my freenas) and if possible, limit by port (ftp and smb) but still the internet. basically guest plus special access. - keep the main guest connected to the internet only (like a good guest).   i know names (trunk/tagging/vlan) but that is all i know.   for hardware, i have a security appliance, 8 port switch, and single access point to test before i set the church network up..   thanks gang 🙂 ... View more