Are you able to see MX replying back with the DHCP offers? I have all the configuration done, but I don't see the MX sending the DHCP offers downstream. ... View more

Hi Phillip, I added, the link to the Meraki documentation and the screenshot of the specific part that tells that it should work. ... View more

As I said in my above replies, I already set the IP helper address on the SVI in the L3 switch. here is the troubleshooting that I have done so far. Took a pcap on the MX LAN, MX sees the DHCP discover coming in as a unicast to the MX IP for the transit VLAN, but it just doesn't reply back with an offer. ... View more

I don't want to add any static routes into the client. All I need is MX to act as a DHCP server for my clients that are behind a L3 switch. with the config that I already had, the MX receives the DHCP relayed unicast, but doesn't reply with an offer even though we had the config. ... View more

please see my reply below ... View more

The above screenshot is how my config looks like on the MX. So the topology looks like below: Client (Should be in the VLAN:20 (192.168.64.0/24) >> L2 switch >> L3 switch (has an SVI for VLAN 20 with 192.168.64.1) >> MX LAN port. I don't have a separate DHCP server in my network and my L3 switch cannot act as a Server, so I want to use the feature on the MX that can act as a DHCP server for the static routes. The documentation explains that we can do it: https://documentation.meraki.com/MX/DHCP/DHCP_Services   ... View more