Meraki

OM1000 · ‎Feb 6 2023

Thanks for the documentation. In your thoughts what would you suggest be the best topology in this case? I am trying to maximize bandwidth across a massive 1.5 mill Sq.Ft facility while being the most redundant I possibly can. Thanks Soichiro! Appreciate the time.

OM1000 · ‎Feb 2 2023

Hi, Sorry, its only 100 total access. So, 200 on the access side and 200 on L3. I was curious if running that many dual links to each switch is possible with the MS435-32's? Thanks!

OM1000 · ‎Feb 1 2023

Hi everyone, I am curious if this will work as a load balancing/MLAG link. Please see below the topology. Thank you!

OM1000 · ‎Jan 30 2023

Hello everyone, I have been getting mixed answers and want to confirm this topology. Am I able to have a MX250 HA pair, LACP to MX425-16 by SFP+. Then run QSFP+ 40G from the MS425-16 Uplink to the MS450-12 40G ports as the QSFP28 ports don’t lower link speeds and also is an uplink port. Using MTP OS2 or OM5 jumpers. Then trunking 40G QSFP+ to all my MS390-48UX’s. Will this work or I am skipping over a thought? Thanks much for your time understanding…

OM1000 · ‎Jan 30 2023

Did connecting through the MS355 work for this? I have the similar issue and was going to go through the MS425-16 and have a QSFP+ trunk to the MS450-12 as it acts as my core SW.

Meraki

Community

About OM1000

OM1000

Community Record

Badges

Re: Dual Linking 2x MS450-12 to MS425-32's to 100x MS390-48UX

Re: Dual Linking 2x MS450-12 to MS425-32's to 100x MS390-48UX

Dual Linking 2x MS450-12 to MS425-32's to 100x MS390-48UX

Trunking a MX250 HA to MS425 to run a MS450-12 as CoreL3

Re: Connectivity between QSFP+ port on MS450 and SFP+ port on Fortigate Fir...