Hello, I am using the 'Update Device Appliance Uplinks Settings' Endpoint to update the two WAN interfaces of a Meraki appliance. I used the Configuration panel on the right site of the Meraki API documentation to manually set the parameters and then sent the request, but I got a 'Response: 400 Bad Request' in response, with the error: "Could not auto-detect IP version for ''." . My request JSON body looks like this, I swapped the IP with a random IP address in this post:    { "interfaces": { "wan1": { "vlanTagging": { "enabled": false }, "svis": { "ipv4": { "nameservers": { "addresses": [] }, "assignmentMode": "dynamic", "address": "", "gateway": "" }, "ipv6": { "nameservers": { "addresses": [] }, "address": "", "gateway": "" } }, "pppoe": { "authentication": { "enabled": false, "username": "", "password": "" }, "enabled": false }, "enabled": true }, "wan2": { "vlanTagging": { "enabled": false }, "svis": { "ipv4": { "nameservers": { "addresses": [] }, "assignmentMode": "static", "address": "1.1.1.1/11", "gateway": "1.1.1.2" }, "ipv6": { "nameservers": { "addresses": [] }, "address": "", "gateway": "" } }, "pppoe": { "authentication": { "enabled": false, "username": "", "password": "" }, "enabled": false }, "enabled": true } } } My requirements are as follows: - I want both of the WAN uplinks to have no vlanTagging, no nameservers, no IPv6 and no PPPoE. - WAN1 should be in IPv4 assignmentMode dynamic. - WAN2 should have a static IP address, e.g. '1.1.1.1/11' and a static gateway, e.g. '1.1.1.2' I think I am using the correct endpoint, but I don't know how to handle the error. Thank you for your time; any advice is much appreciated! ... View more

Hello everybody, I am writing a python script that creates a new network, then should add a device to it to further configure it. The devices which should be added to each network are already claimed to my organization, but I can't find an API endpoint to add a device to a network. I know of the endpoint "claimNetworkDevices" which per description says: "Claim devices into a network.". Should I do another call to this endpoint with the serial of the devices which are already claimed to my org to add them to each network, or am I totally wrong here? Thank you for your patience and time ... View more