Hi Tony,   Thanks for the update. Just adding that if you have the default algo the sh run command won't show you the algo you should use show run all | i ip ssh Removing only the ssh-rsa from the command worked for me. ... View more

Update: After working with TAC the proper discriminator to use seems to be `logging discriminator DROP-ME msg-body drops meraki-user|Public-key` ... View more

UPDATE: After upgrading my 9300 to 17.6.5 I had issues with DMI and netconf Apr 26 05:42:49.816: %DMI-5-SYNC_START: Switch 1 R0/0: dmiauthd: Synchronization of the running configuration to the NETCONF running data store has started. Apr 26 05:43:02.472: %DMI-3-SYNC_ERR: Switch 1 R0/0: dmiauthd: An attempt to synchronize the running configuration to the NETCONF running data store has failed: Apr 26 05:43:02.472: %DMI-3-DMI_DEGRADED: Switch 1 R0/0: dmiauthd: The dmi infra is operating in degraded mode. Most synchronizations from IOS to NETCONF datastore will not be performed CORE(config)#do show platform software yang process state Confd Status: Started Process Status State ---------------------------------------------------------- nesd Running Active syncfd Running Active (degraded)   I opened a case with meraki support and they suggested that I remove my descrimanator. It solved the netconf error. But now my logs are filled with the Deprecation warning message again. Any other solution ? Any idea when meraki will stop using ssh-rsa ?   Thanks, ... View more

Hello,   Same problem here with 9300 running 17.4 Used this command to remove the annoying logs from the buffer logging discriminator MERAKI mnemonics drops SSH_COMPLIANCE_VIOLATION_PK_ALGO msg-body drops (Login Success.*meraki-user|User meraki-user has exited)   Thanks, ... View more

Thanks @DevOps_RC for the workaround. I have the same problem here with a 9300 running 17.04. Ports that were already in a port channel before the on-boarding seems fine but i can't add new ports. Do you have an update on this issue ?     ... View more