Meraki

Safe_ISA · ‎Feb 14 2023

no solution from meraki, the support mention that some of these network the config was sync , in spite off the dashboard show it is update. some of the network suddenly start unbind successfully . for the one that still gave issue i use work around by building new network that not bind to templet and make sure this network have the same config , then move the devices from old network to the new network . i know it is alot of work but i utilized the Meraki API and automate the whole process

Safe_ISA · ‎Nov 21 2022

no nothing yet . i also have ticket open and waiting their response. in meantime the way how i by pass this issue and automate the process . is by getting all the current config for the network then remove the old network , then push the config to the new network that not using any templet

Safe_ISA · ‎Nov 18 2022

thank you Ryan . i'm sure my syntax is correct because the same syntax is working fine with other network under . it only with certain network that i get that error . also i run into same error if i do that through the meraki dashboard by hit the unbind button and select unbind and retain config Unbinding Failed! Selected networks failed to unbind from template <templet name>as some of the configurations could not be retained. i had ticket already open with Meraki support still waiting their response . i assume that there is some setting the templet that prevent that unbind but not sure which one

Safe_ISA · ‎Nov 18 2022

Greetings i'm facing some issue with unbind and retain the config for some network that we have . some networks just work fine with retain the config but other network it gave that error {'errors': ['Unbinding will not retain the correct config']} if post that {"retainConfigs": True} if i remove that part from the post or i set to false then it will work fine but i will lose the config. and that will not help with my automation . my question is there certain device model or version that retain config is not working on . . is there any extra step i need to do it before i post this call. again i notice it work fine with other networks with no issue but it just triggered on some network. if i do the unbind and retain config through the dashboard then it will show ( fail to unbind)

Meraki

Community

About Safe_ISA

Safe_ISA

Community Record

Re: unbind and retain config issue

Re: unbind and retain config issue

Re: unbind and retain config issue

unbind and retain config issue

Re: unbind and retain config issue