Hello, I have an MX64 that is configured as a spoke (192.168.95.0/24) to two hubs:   HUB1 is a MX64 that only has its local LAN (192.168.93.0/24)   HUB2 is my core MX400 from here I advertise all private address spaces: (large MPLS network)   I want traffic sourced from the spoke(192.168.95.0/24) to go directly to the 192.168.93.0/24(HUB1) network. The problem is it is traversing HUB2 to get there.   When traffic is sourced from HUB1 to the spoke it works correctly.   I was assuming that the more specific route would be chosen? That 192.168.93.0/24 would take priority over 192.168.0.0/16. I also have HUB1 listed first.  Not sure what I am missing here...   All routes are green in the route table.   Also, a simpler question: Not having a default route selected will dump all public traffic out the local internet connection, correct? I don't want to move that traffic across a VPN.   Thanks in advance for you help.       ... View more