Meraki

RaulC · ‎Jan 13 2022

Hi @PhilipDAth my plan is to keep the VPN client from Windows because the company is Microsoft based and it's easier for all users. It's there a way to keep using the same vpn client and the routes&credentials to be saved in the connection settings? It's very uncomfortable to retype the routes and credentials every time you want to use the vpn tunnel (sometimes 3-4 times per day). Thanks

RaulC · ‎Jan 10 2022

I already split the tunnel, check the attached image. After I unchecked the * Use the default gateway, the internet is working well, but I'm not able to access the local resources or internal IPs. At this moment I would like to configure these setting on the existing VPN client because the entire company is using the same connection settings, only if is not working at all I will try to find other solutions, like Cisco Anyconnect. Thanks.

RaulC · ‎Jan 10 2022

Hello everybody, I set a client VPN configuration on a Meraki MX84 gateway, which mostly is used on windows 10 clients. I want to configure the Windows VPN client to NOT use the default gateway on the remote network which is working fine but I can't access the remote resources anymore(VM's from the on-premise network). This option is important for us because I don't want all the network traffic to be routed through the Meraki gateway (like web traffic, youtube, etc. other activities that consume bandwidth). Due to the work-from-home program the load of the network band is pretty large so is this option available? Many thanks for your support! Raul

Meraki

Community

About RaulC

RaulC

Community Record

Badges

Re: Client VPN not working without default gateway

Re: Client VPN not working without default gateway

Client VPN not working without default gateway