The above should read spanning-tree as opposed to spamming tree, but I actually quite like the idea of a spamming tree 😈 ... View more

Basically I have two firewalls with different subnets behind these and I want to connect these two with a link using their lan ports because there are resources that needs to communicate with each other. I found it dificult to understand how meraki mx allows incoming traffic from fw1 on the right side of diagram. So I think I understand now that I need to create static routes and the traffic will be allowed to come in if we don’t have any other outbound rule denying the resources behind the MX to respond to the resources behind the fw1. There is only one rule the default one with allow any any.  ... View more

Do you mean that if I have a lets say default route 0.0.0.0/0 with wan IP as a default route and then I put the other route with a specific destination toward the other firewall, the traffic will still match the 0.0.0.0/0 and never reach the one we want! If thats the case, can we solve this with permanent routes on the clients itself?   route ADD destination_network MASK subnet_mask  gateway_ip   ... View more