Yes, this is exactly the network design that is currently in place. 2 offices connected by site to site VPN. And, the user connects to both of them at the same time from home. Different LAN subnets at each location. ... View more

Not sure exactly what I'm looking for, but here is the route print results:   Microsoft Windows [Version 10.0.19042.1165] (c) Microsoft Corporation. All rights reserved. C:\WINDOWS\system32>route print =========================================================================== Interface List 6...34 e6 d7 22 a2 d4 ......Intel(R) Ethernet Connection I217-LM 19...d8 fc 93 28 d7 6a ......Microsoft Wi-Fi Direct Virtual Adapter 5...da fc 93 28 d7 69 ......Microsoft Wi-Fi Direct Virtual Adapter #2 49...........................Walschon VPN 20...d8 fc 93 28 d7 69 ......Intel(R) Dual Band Wireless-AC 7260 7...d8 fc 93 28 d7 6d ......Bluetooth Device (Personal Area Network) 1...........................Software Loopback Interface 1 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.43.1 192.168.43.27 4275 0.0.0.0 0.0.0.0 On-link 192.168.80.198 36 96.90.231.5 255.255.255.255 192.168.43.1 192.168.43.27 4276 127.0.0.0 255.0.0.0 On-link 127.0.0.1 4556 127.0.0.1 255.255.255.255 On-link 127.0.0.1 4556 127.255.255.255 255.255.255.255 On-link 127.0.0.1 4556 192.168.43.0 255.255.255.0 On-link 192.168.43.27 4531 192.168.43.27 255.255.255.255 On-link 192.168.43.27 4531 192.168.43.255 255.255.255.255 On-link 192.168.43.27 4531 192.168.80.198 255.255.255.255 On-link 192.168.80.198 291 224.0.0.0 240.0.0.0 On-link 127.0.0.1 4556 224.0.0.0 240.0.0.0 On-link 192.168.43.27 4531 224.0.0.0 240.0.0.0 On-link 192.168.80.198 36 255.255.255.255 255.255.255.255 On-link 127.0.0.1 4556 255.255.255.255 255.255.255.255 On-link 192.168.43.27 4531 255.255.255.255 255.255.255.255 On-link 192.168.80.198 291 =========================================================================== Persistent Routes: None IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 20 66 ::/0 fe80::8c45:ff:fec6:be97 1 331 ::1/128 On-link 20 66 2607:fb90:822c:6d4a::/64 On-link 20 306 2607:fb90:822c:6d4a:59e5:f8b4:b831:9fc8/128 On-link 20 306 2607:fb90:822c:6d4a:e192:67e7:329e:b4ae/128 On-link 20 306 fe80::/64 On-link 20 306 fe80::59e5:f8b4:b831:9fc8/128 On-link 1 331 ff00::/8 On-link 20 306 ff00::/8 On-link =========================================================================== Persistent Routes: None ... View more

It has been working for quite a while before one site was upgraded from a SonicWall TZ215 to a TZ470 just recently. ... View more

Yes, she connects to both sites at the same time from home. When she's in the office, she only utilizes the site-to-site VPN. So, yes the problem only occurs when she is only at home. ... View more

Both. When the user is in the office (the one with the Sonicwall device), she is able to access the Meraki network over the site to site VPN. But when the user is working from home she accesses both offices through the client VPN. There was never an issue with this configuration in the past 3 years until now. It's possible I may have missed something when I was replicating the settings for the site to site VPN, but I'm not sure where. ... View more

As far as I know everything should be the same on Meraki's side. Even when I had to re-establish the site to site VPN between 2 offices with one of the offices running a SonicWall firewall. I duplicated the settings. Where would I check to verify the tunnel settings? ... View more