Hello to the community,   I have a question if we use AIR-ANT2513P4M-N that is 13 dBm how much should the transmit power should be in order to be in regulation ? for example if the power is 1dbm the EIRP is 14dbm (25 mW) which is the best practice for design. Based on the regulation the maximum power should be 100mW (20dBm)  this means that the maximum power when this antenna is plugged in is 7dbm.   Meraki mention the following  For 5 GHz, Auto Power reduction algorithm allows TX power to go down only up to 8 dBm.    This means that the EIRP will be 21 dBm and can not be within the limits .Any idea ?   Thank you ... View more

Hello Team,   I need to cover a large amount of people in an area so i design by placing Sector antennas AIR-ANT2513P4M-N one near the other as these are very narrow as i read that high density is about 30 clients per AP.   Can i place on the same pole two MR86 with AIR-ANT2513P4M-N antenna facing with the opposite direction  in different channel or is bad idea and i will have interference?   If yes i should install the in different heights or back to back ?   Thank you     ... View more